5 Shelf Economy Commercial Drying Cabinet

Features:

• Cabinet is manufactured with the highest quality materials
• It is designed for ease of use and long-lasting durability
• 17.5 cu. ft. of interior capacity  for the ultimate drying flexibility and versatility
• The overall design offers wide flexibility to both warm and dry a wide variety of items in the medical environment
• Easy access to all major components for easy removal and installation of replacement parts, should the unit ever need to be serviced

Cabinet Construction:

• Powder coated or stainless steel cabinet and doors
• The minimum suggested enclosed space to install the cabinet within is 71.5inH x 27.5inW x 26.5inD, if the unit will be used in a confined space
• Open front area only, or a door that can be opened during use

Electronic Touch Control Panel:

• Units features a simple to use touch-sensitive electronic control panel, which is located above the door
• The control panel displays and controls temperature and run times
• The control panel also displays the run time remaining when the unit is in operation

Temperature Settings:

• A simple touch of the temperature pad on the control panel allows a total five preset drying temperature settings, with associated LED light indicators
• There are a total of five factory preset temperatures which can be selected: Air Only, 105F, 120F, 130F & 150F. 

Time Settings:

• A simple touch of the hour and minute time setting pads on the control panel allows users to select the run time
• Maximum run time setting is 4 hours

Electrical Configuration:

• Unit requires 120 volt power source and a single phase 15 Amp breaker
• They are shipped with a standard 12 ft. long/3-prong electrical plug that can be plugged in to a standard electrical outlet

Heating Element:

• One 1200 watt 120v heating element delivers heat to the cabinet’s interior
• The heating unit’s access & design allows for very easy removal and replacement if required
• Units is capable of heating to a maximum temperature of 150F, with a 70F ambient room air temperature
• The heating element is mounted using 20-gauge cold rolled steel mounting brackets
• The heater’s air outlet evenly distributes heated air throughout the interior of the cabinet

Blower Motor:

• The blower motor is bolted to the top frame under the unit’s top cover
• An axial fan is utilized to blow an approximate mixture of 50% fresh & 50% re-circulated air across the heating element

Ventilation:

• Ventilation is at the users’ discretion
• Units has a 4in diameter opening on the top of the cabinet, if ducted ventilation is desired by the user
• For both adequate incoming air & ventilation, it is recommended to have a minimum of 4in of clearance above the top of the cabinet to any ceiling, and at least 2in of clearance from any walls from the back & sides of the cabinet

Inducted Air:

• There is a 7 1/2in x 2in opening on the top of the cabinet, located 1 3/4in -3 3/4in from right sidewall and centered from the front to the back of the unit

Please see tab above for additional options.

Specifications:

• Exterior dimensions: 67.5in H x 23.5in W x 24.25in D
• Electric connection: 120V 15 Amp breaker
• The power cord is at the bottom center of the back panel and is 12 ft long
• Interior capacity:  17.5 cubic ft.
• Electric heating:  2.8 kW
• Total shelf area: 7.5 sq. ft.
• 3 shelves dimensions: 2.5 sq. ft. each
• Net weight:  150 lb.
• Shipping weight:  175 lb.                    
• Manufacturer warranty: 2 years

• Large Medical Warming/Drying Cabinet